![]() ![]() If you are using FreePBX the file will be /etc/asterisk/sip_nf, In the case of Asterisk-GUI file is /etc/asterisk/users. ![]() This step is important otherwise the phones will not register and on the phone’s display you can see the message Registering. Įdit your Asterisk SIP configuration and add nat = no below the user context. Rename the with . Then open that file and change the following lines to match with your IP PBX details. This package contains the files needed for installing the VoIP Phone Firmware. Refer this article to configure DHCP Options. companies over the years and have developed SIP firmware for use in their proprietary call control platforms. Open your dhcp server configuration and add TFTP server IP address as the boot server in DHCP scope Options. Transfer successful: 258 bytes in 1 second(s), 258 bytes/s You should get the message starting “Transfer Successful”.(If your OS is Win7/Vista you have to install tftp client from the Add/Remove Programs) C:\Users\shyju>tftp 192.168.20.124 get dialplan.xml Goto command prompt(Start>Run>CMD and press enter) and enter the following command. Proof of this is the SIP logo in the upper right corner of the phones screen. Open the tftp server software and make the SIP firmware extracted directory as the root directory of the tftp server. Before beginning, the Cisco phone must have the SIP firmware installed. Cisco 7911G/7942/7945/7962 Phone with Asteriskĭownload the firmware ( 7911 , 7942, 7945, 7962) and extract it.ĭownload and install/extract the tftp server software. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |